Find the Answers You Need. Ask Questions that Matter to You.
Choose a category on the left below to ask questions of our experts and to see Q & A threads in your area of interest.
Welding, Arc Questions
I see in RIA 220.127.116.11 minimum height of a fixed guard is 55". Does this assume the robot is floor mounted? What if the robot is on a riser greater than 55"?
We would like to have a Fanuc robot hold a Front Floor Panel vertically in the air; then the operator would use a Warren Emhart manual stud welding gun to weld 13 studs onto the panel. Is there a way to create a safe situation in this senario? Must the power to the robot be killed during the welding process? How can the grounding be best accomplished?
We recently acquired a refurbished ABB IRC5 robotic weld cell. After choosing the robot on the "Tasks to Start and Stop" screen and making the necessary weld adjustment, the tasks which were stopped do not activate when put in automatic mode. This has to be done manually. I understand that this condition can be corrected in the configuration screen, but I have been unable to find information on how to accomplish this.
I use a Fanuc welding robot, recently I've been having a problem with welds floating all over the plac. At the company I work at we use a non cooled whip and welding gun doing pulse and mig welding at high temps and heavy weld. The robot is usually constantly running. Any ideas on what could be causing the floating welds?
I'm welding reinforcement bracing on the base of a robot! Should I shut the power off before welding or just ground to the area I'm welding to prevent arc damage!
What is the difference between an arc fault and weld fault?
I am interested in knowing the Welding Process for can welding ... These are big cans with a diameter of 20 inches steel. MIG or TIG welded. We would like to have automated robotic welding, as these cans are used for Diesel Particulate Filters. Weld joints will be subjected to high temperature and vibration.
What are the commands used in robot arc welding?
Looking for Panasonic Robotic Welding services. I have a Pana Robo, model#: AW-005CL, I was wondering if anyone has the manual on this robot, or can provide any service and machine setup.
I have a problem with our Panasonic welding robots. The monitor shows an error message 24V. What should I correct?
I have a problem with welding robots, the monitor shows an error message 24V. What should I improve?
I am considering purchasing a Fornius robotatic CMT Welding Process. My published Customers require I comply with ASME Section IX. How does this process meet the ASME Section IX requirements?