• Font Size:
  • A
  • A
  • A

ASK THE EXPERTS

Ask a Question


Find the Answers You Need. Ask Questions that Matter to You.

Ask one of our experts a question or search below to see Q & A threads in your area of interest.

Category: System Integration

My husband owns an industrial system integration company in China. We are looking for a Germany industrial robot decelerators supplier to be our partner. Would appreciate if any of you could provide to me any supplier information and contacts.

1 Reply » Click Here

I am looking for recommendations on system integrators who have experience with robotic laser cutting systems. Specifically, using Fanuc robots and IPG fiber laser systems. We are familar with KMT, but not any competitors.

1 Reply » Click Here

I want to know who is responsible for calibration of the servomotor in the servo gun in a BIW project.1)line builder. 2)Gun manufacturer 3) Servomotor manufacturer 4)The controller manufacturer.

1 Reply » Click Here

Hello, We are looking for a 3D machine vision system to work with our robotized palletizing and depalletizing application based on ABB robots. The ideal system would need to analyze a full pallet of boxes, check for possible defects that might interfere with the pick operation, output the dimensions and the position of the box Check and confirm the space where a box will be placed. Can you help us find something similar? Kind regards, Giedrius

1 Reply » Click Here

I currently am upgrading a robotic workcell with new robots and was asked if I had any robotic function checklist that need to be completed upon installation by my integrator. What items should be included in a function checklist to ensure they did a proper install?

1 Reply » Click Here

Are there any good webinars on Systems Integration?

2 Replies » Click Here

What CAM software but RobotMaster creates 6-axis robot program code off-line?

1 Reply » Click Here

What is exactly moving between the motion control block of the robot controller and manipulator arm? Is there any feedback from servo motors to motion control block or is the actual control done inside servos?

1 Reply » Click Here

I have 4 KUKA 761-125/150 robots from 1994 that I'm trying to get running. Having trouble getting the feed computer to talk to the control CPU. Anyone have any experience with these older machines? I'm very close but need a little insight. Thanks in advance. Marc

1 Reply » Click Here

I'm looking for a SAW or MIG process to weld big nozzles or pipes in pressure vessels; the requirement is to weld with a semi automatic process in flat position.

4 Replies » Click Here

I have a series of 4 round parts ranging from an OD of 200mm and an ID of 108mm; thickness of 8mm. I'm looking for the best solution of deburring both sides following a turning operation. For now we'll say the OD has large spline teeth which have a large burr after turning. My vision is using a robot to pick the part from a conveyor, rotate the part to a series of stationary air driven wire brush units, and the robot able to rotate the part at a sufficient enough speed to deburr the part. Followed by placing the part on a conveyor. Can anyone help with this vision?

5 Replies » Click Here

I'm looking for applications with robotics using wireless communications. There are lots of wireless communications uses in the military robots such as UAVs etc... I'm specifically looking for other wireless communications applications in other than military uses.

1 Reply » Click Here

Is it possible adapt an old ABB S3 or S2 Controller for a mill system? If so, which software is needed?

1 Reply » Click Here

What integrators are experienced with coiling wire or cable that has objects attached to one end?

2 Replies » Click Here

I have a unique application for under floor wire tracking. This is the same type of wire tracking device used on parts delivery systems using automated pallet trucks in assembly plants. I need the tracking units to adapt over to a different type of delivery system needed for a hospital enviroment. My time frame is short, less than 2 months, and we need to move fast as the wire has to be included in the building design. Thank you in advance for any and all help on this one. Include your info and credit for the help will be noted in the designs. You will get a copy after the finalization.

2 Replies » Click Here

I am looking for any case studies on robotics applications in the timber/lumber industies. Thanks, Paul

1 Reply » Click Here

Browse by Product:



Browse by Company:


Browse by Services: