- MI, United States
- Tel: (248) 203-9602
- Fax: (248) 203-9605
- Member Since 2010
- Robotic Supplier
Dynalog, Inc. provides robot cell calibration and robot performance analysis products (software and hardware) to robot manufacturers and robot end-users in North America, Europe, and Asia. Dynalog products allow operators not only to identify a robot cell's signature (including robot Denavit-Hartenberg parameters, compliance parameters, fixture location, etc.); but to also use that signature to filter robot programs (e.g., to perform robot cell cloning, off-line programming and robot maintenance). Dynalog calibration software is also used in robotic flexible measurement systems (FMS), as well as other precision robotic applications, where robot positional accuracy is required. Dynalog robot performance analysis products allow operators to verify robot performance characteristics, both static and dynamic, according to ANSI/RIA and ISO standards, as well as simulation/robot performance according to Ford Robot Model Accuracy Standards.
Problem: Katayama American Company, Inc. (KACI) came to Dynalog with the following challenge: Integrate a robot from Motoman and 3D sensor from LMI to perform 100% in-line inspection of up to 12 features on each of the
Since implementing offline programming, and then refining the process, Johnson Controls, Inc. has dramatically reduced programming costs wile improving production uptime in its robotic waterjet-cutting cells. JCI reduced line utilization for programming purposes by 96 percent, from 50 hours to 2 hours, with an 82