• Font Size:
  • A
  • A
  • A


Lincoln Electric's Red Goes Green – Statiflex® Environmental System Improves Work Environment and Reduces Energy Costs

Lincoln Electric, Automation Division

Cleveland – When used properly, source extraction can reduce the amount of welding dust, smoke and fumes in the work environment, resulting in a cleaner workplace. Fume extractors filter contaminated air and can re-circulate it back into the work area, saving energy cost by not having to re-heat or cool new air. Lincoln Electric’s Statiflex® does just that.

This wall-mounted, low vacuum system is designed for light to medium duty welding applications. With extraction arms ranging from 6.5 feet (2 meters), 10 feet (3 meters), 13 feet (4 meters) and a telescopic arm that retracts from 3 feet (1 meter) to 4.5 feet (1.5 meters) and pivots 45°, the Statiflex has a wide range of reach capabilities. The reach of the arm can also be increased with the addition of an extension crane. Extension cranes are available in 7 feet (2 meters) and 14 feet (4 meters).

The Statiflex® is great for a variety of shops that need welding fume extraction and where floor space is a premium – including maintenance departments, general fabrication and welding shops, welding schools and industrial welding settings.

The Statiflex® is available in two models. The Statiflex® 200-M can be used with one or two arms and draws air through the fan and spark arrestor, capturing welding fumes inside the unique LongLife® filter. Particulates are collected on the inside of the cartridge, keeping hands clean during filter maintenance.

The Statiflex® 400-MS uses a RotaPulse® self-cleaning filter process. The cleaning of the filter, segment by segment, with compressed air results in a consistently high airflow. When the filter becomes dirty, a pressure sensor activates the cleaning system. Compressed air from the tank releases through multiple air jets to clean one section of the filter at a time. A complete cleaning cycle can be activated by a manual switch. Captured welding fume particulates are knocked off of the filter cartridge into a removable plastic bin located at the bottom of the unit.

For more information on welding fume extraction equipment, please request brochures E13.14 and E13.15 by visiting www.lincolnelectric.com.

Back to Top

Browse by Product:

Browse by Company:

Browse by Services: