• Font Size:
  • A
  • A
  • A


Pneumatic Collision Sensor - The Ultimatic™

RAD - The Robotic Accessories Leader

The Ultimatic™ Pneumatic Collision Sensor maximizes uptime and, with a repeatability of 0.0005” (0.013mm), ensures that the final output still meets your exacting product quality standards - even after a crash. The Ultimatic™ Collision Sensor is RAD’s patented mechanical collision sensor that: *STOPS THE ROBOT* within 2 to 10ms of a collision to minimize costly damage to the robot and/or tooling. RAD’s collision sensor provides protection even if the robot itself is not moving. *ABSORBS THE CRASH ENERGY without releasing the air pressure in the unit thus preventing tooling ‘sag’ and eliminating the effects of compressed air being released into the environment. *AUTOMATICALLY RESETS to within ± 0.0005” (0.013mm) in x, y, and z dimensions and to within ± 0.017 degrees rotationally to maximize uptime and eliminate the need for human intervention. *Allows pneumatic adjustment so the user can easily change the amount of resistance the unit must encounter before signaling a collision. *Has a compliance adjustment feature that lets the user determine the amount of deflection allowed before a signal is sent to your robot’s E-stop or controller. OPERATING PRINCIPLE RAD’s Ultimatic™ Collision Sensor works by establishing the minimal points of contact required to restrain all degrees of freedom (movement) in normal operation. When a collision occurs, external forces upset this balance thereby allowing angular, rotational, or compressive compliance. This motion opens a normally closed switch and sends a signal to your robot’s E-stop or controller. Note: The Ultimatic™ Collision Sensor can be used as a compliance (alignment) device by installing the unit without connecting the sensor switch. Can also be used on linear actuators, pick & place machines, and other automated equipment



Leave this field empty

Browse by Product:

Browse by Company:

Browse by Services: