• Font Size:
  • A
  • A
  • A

Industrial Robotics Case Studies

Application: Spot Welding

POWERTRAIN – CASE STUDY

POSTED: 08/23/2019

PLATE PACKING LINE SYSTEM FOR DUAL CLUTCHES In the case of the clutch packs for a dual clutch, the deviations of the friction and clutch plates are optimally equalized. Precision is key here: The thicknesses of the plates are measured and classified with a high

POWERTRAIN – CASE STUDY

POSTED: 08/23/2019

REAR AXLE TRANSFER TRANSMISSION WITH RIGID AXLES The assembly line system includes all measuring and assembly processes for a rear axle transmission, plus additional modules for assembling the axle tubes, side shafts and wheel bearings with the brake modules. Due to the size and weight

The Growing Role of Electromechanical Actuators in Automotive Manufacturing

POSTED: 11/26/2018

Maintaining a competitive edge in the global marketplace requires manufacturers to continually search for new processes and technologies that increase production quantity, quality, and flexibility. Nowhere is this more apparent than in the automotive industry where shorter time-to-market cycles and ongoing cost containment are critical to enhancing shareholder value in

Robots: Saving Your Jobs, Not Destroying Them

POSTED: 08/28/2018

You know the common fear: robots are coming to take your jobs. This fear of new technologies dates back hundreds of years about the inevitable changes that they bring. However, again and again it has proven that while some jobs are lost, they are ultimately replaced with new ones. Past technological

OCTOPUZ Programs Panasonic Welding Robot at Accumetal Manufacturing Inc.

POSTED: 08/14/2018

Just like there are a multitude of robot brands in the industrial robotics industry, there are also a multitude of options for programming. Manual programming, OEM specific software and third party offline programming software are some of the different approaches. OCTOPUZ Offline Programming and Simulation Software is a third-party software solution

Crown relies on FASTSUITE Edition 2 for offline programming of robotic welding cells

POSTED: 08/10/2018

Robot welding: More efficiency for programming and equipment fabrication The forklift manufacturer Crown relies heavily on robotic welding automation for production of their equipment in the Roding (Germany) facility. The results for increased productivity and weld quality are quite impressive and therefore the number of automated welding systems has continued

Removing Production Bottlenecks through Automation

POSTED: 08/07/2018

Tufting, one of the most sought-after and classic upholstery styles, is commonly incorporated into the design of furniture. How is this Victorian button-like look achieved? We got some insight from Fibreline, the largest independently owned

OCTOPUZ: Preparing Students for the New Industry Standard

POSTED: 07/31/2018

Throughout a student’s education, the student is taken through a curriculum that shapes him/her in the best way possible for their career path. Only so much can be covered in the time allotted and it is often difficult for students to pursue their own interests within the field. It is

Stepping Into the Future With Old World Stone

POSTED: 07/25/2018

Burlington, ON - based Old World Stone, has been providing cut stone for over 30 years.  From humble beginnings, they have grown to become one of North America’s premier suppliers of dimensional cut sandstone, limestone, and marble.  At Old World Stone, they combine the traditional craft of cut stone in

Tool Changers Enhance Flexibility at Scania Oskarshamn

POSTED: 06/26/2018

The efficient use of industrial robots requires tool changers, according to experience gained from Scania’s new bodywork facility in Oskarshamn, Sweden. When choosing supplier, quality and support are crucial factors. Scania’s facility in the Swedish coastal town

OCTOPUZ Case Study: The Benefits of Full Automation

POSTED: 12/12/2017

For over 30 years Focus Auto Design Inc, based in Calgary AB, has been manufacturing OEM appearance accessories. Recently, with a change in their manufacturing processes they have successfully launched an innovative new product known as the Tough FormFit Guard, a rouged hood protector manufactured from acrylic capped ABS. This new

Velox Machine Guarding Protects Omni-Channel Fulfillment Center

POSTED: 11/14/2017

Invata Intralogistics, experts in advanced automation systems, selected Velox Machine Guarding to protect its new 465,000 square foot omni-channel fulfillment center. Invata designed and built the facility for Destination Maternity Corporation, the world’s largest designer and retailer of maternity apparel. The facility and controlled warehouse automation system incorporated a wide array

Control Panels USA and OCTOPUZ: A Winning Combination

POSTED: 08/23/2017

Control Panels USA is a UL508A, UL698A, & UL698B manufacturer of Control Panels and Relay Rack assemblies for clients in a wide range of industries. They have been providing reliable,

How Dimic Steel Tech Cut Their Programming Time In Half

POSTED: 07/06/2017

Dimic Steel Tech, a metal fabrication and machining service provider in Upland, California uses OCTOPUZ to program their robot, a KUKA KR 16 for MIG welding, from start to finish. Every part they have is programmed in OCTOPUZ so that it is easily placed on

5 RTOS Performance Compared on EtherCAT Master – IntervalZero’s RTX/RTX64 Stands Out

POSTED: 03/15/2017

The KINGSTAR Soft Motion platform supports multiple industry-leading EtherCAT Masters to guarantee that devices from different manufacturers can work together seamlessly. The centralized controller architecture provided by an EtherCAT Master ensures all of the benefits of EtherCAT technology, like real-time operations, short cycle times, and maximum performance for minimal expense. One


Browse by Product:



Browse by Company:


Browse by Services: