Industrial Robotics Case Studies
Peripherals: Machine Vision
Compatible with all oscilloscopes, Isoprobe® III high-frequency (250-500 MHz) test probes have coaxial connecting cable with low capacitance.
Used where clamping is not possible, magnetic adapters safely attach test leads onto screw heads.
The great advantage is obvious: the modular design permits the construction of application-specific plug connectors with standard modules.
As a customer-specific solution, Multi-Contact has developed fully shielded connectors for power supply with frequency converters, e.
VSoC-powered readers increase read rates, reduce downtime and speed setup In the not-so-distant past, manufacturers using laser scanners and conventional area-scan image based readers had to put up with inherent technology limitations.
100% inspection and identification is essential for most products.
Machine Vision and Industrial Robots: A Powerful Team Reprinted by Permission from Robotics World Magazine (Posted 10/05/2004) While robotic assembly applications have increased in both number and complexity over the years, a large number of applications have been passed over due to technology.
Cooperating squads of robotic vehicles may some day be employed for tasks such as fighting forest fires, cleaning up oil spills, delivering and distributing supplies to remote field operations and conducting a variety of military missions.
In response to the Department of Defense's Joint Program Office for Unmanned Ground Vehicles' request to develop a prototype of a mobile robotic test bed platform for military surveillance and reconnaissance missions, Sandia's Intelligent Systems and Robotics Center (ISRC) developed SARGE (the Surveillance And Reconnaissance Ground Equipment robot).
When conditions are too dangerous for people after mine disasters, robots can go safely where people cannot to locate survivors, check the atmosphere, or assess the condition of the mine.
Problem: InteSeys Technologies, Inc, molds a wide range of parts for automotive applications as well as others.
The US Army is responsible for coordinating munition demilitarization for all the Services.
Many of the thousands of nuclear weapons which are being retired by the United States contain components known as explosive gas generators.
Problem: The manual assembly of fiber optic pigtails requires operators to work with super small parts that have sub-micron assembly tolerances.